Mechanical and Thermal Characterization of Composite from PLA and Sugarcane Bagasse

Authors

  • Krishnadev Prabhu N S Department of Mechanical Engineering, Vidya Academy of Science & Technology, Abdul Kalam Technological University Author
  • Neeraj Kaippara Department of Mechanical Engineering, Vidya Academy of Science & Technology, Abdul Kalam Technological University Author
  • Niranjan T A Department of Mechanical Engineering, Vidya Academy of Science & Technology, Abdul Kalam Technological University Author
  • Sunena K S Department of Mechanical Engineering, Vidya Academy of Science & Technology, Abdul Kalam Technological University Author
  • Sarath Babu Ramachandran Department of Mechanical Engineering, Vidya Academy of Science & Technology, Abdul Kalam Technological University Author
  • Renjith Raj Department of Mechanical Engineering, Vidya Academy of Science & Technology, Abdul Kalam Technological University Author

DOI:

https://doi.org/10.21467/proceedings.7.5.11

Keywords:

Polylactic Acid, Sugarcane Bagasse, Compression Moulding

Abstract

This project focuses on developing and characterizing a sustainable bio composite made from polylactic acid (PLA) reinforced with sugarcane bagasse fibers. These composites enhance mechanical properties such as strength, toughness, and thermal resistance compared to pure PLA, making them suitable for applications like packaging, automotive parts, and disposable tableware. Bagasse, a byproduct of sugarcane processing, adds value by utilizing agricultural waste, reducing costs, and promoting resource efficiency. PLA, a biodegradable thermoplastic from renewable sources like corn starch and sugarcane, has a lower carbon footprint than petroleum-based plastics. However, its limitations, such as low thermal stability and brittleness, restrict its use in high-temperature or high-stress environments. Reinforcing PLA with natural fillers like sugarcane bagasse can improve mechanical strength, flexibility, and heat resistance while maintaining biodegradability. A 3D model of a standard tensile test specimen was scaled and simulated to evaluate the effect of bagasse fiber reinforcement. The results showed that adding bagasse fibers improved tensile strength and stiffness. Sugarcane bagasse was processed, treated, and incorporated into a PLA matrix using melt blending followed by compression moulding. Mechanical properties were analyzed through impact and tensile testing, revealing that 15 wt.% treated bagasse fibers enhanced tensile strength with a slight reduction in impact strength, but remained comparable to neat PLA. These findings demonstrate that properly treated bagasse fibers can effectively reinforce PLA, creating bio composites with superior mechanical performance while maintaining biodegradability. This project contributes to sustainable material development by utilizing agricultural waste to enhance biodegradable polymers for environmentally conscious applications.

References

[1] M. N. M. Azlin, S. M. Sapuan, M. Y. M. Zuhri, and E. S. Zainudin, “Mechanical, morphological, and thermal characteristics of PLA composites reinforced with woven polyester fiber,” Fibers Polym., vol. 23, pp. 234–242, 2022. https://doi.org/10.1007/s12221-021-0139-2

[2] S. R. T. Reddy, A. V. R. Prasad, and K. Ramanaiah, “Mechanical performance of PLA composites reinforced with jute fiber for sustainable applications,” Mater. Today, Proc., vol. 44, no. 1, pp. 917–921, 2021. https://doi.org/10.1016/j.matpr.2020.10.806

[3] L. Wang, Z. Tong, L. O. Ingram, Q. Cheng, and S. Matthews, “Bio-based PLA composites using bagasse residue from biorefineries,” J. Polym. Environ., vol. 21, pp. 780–788, 2013. https://doi.org/10.1007/s10924-013-0601-3

[4] V. DeStefano, S. Khan, and A. Tabada, “Recent trends in PLA-based medical applications,” Eng. Regen., vol. 1, pp. 76–87, 2020. https://doi.org/10.1016/j.engreg.2020.08.002

[5] M. A. Mahmud and F. R. Anannya, “Utilization of sugarcane bagasse as a cellulose fiber source for multi-functional use,” Heliyon, vol. 7, no. 8, e07771, 2021. https://doi.org/10.1016/j.heliyon.2021.e07771

[6] R. Z. Khoo and W. S. Chow, “PLA-based eco-composites with sugarcane bagasse: Mechanical and thermal investigations,” J. Thermoplast. Compos. Mater., vol. 30, no. 8, 2015. https://doi.org/10.1177/0892705715616857

[7] V. S. G. Silverajah, N. A. Ibrahim, W. M. Z. W. Yunus, H. A. Hassan, and C. B. Woei, “Thermal and structural properties of PLA and epoxidized palm oil blend systems,” Int. J. Mol. Sci., vol. 13, no. 5, pp. 5878–5898, 2012. https://doi.org/10.3390/ijms13055878

[8] J. Jaafar, J. P. Siregar, C. Tezara, M. H. M. Hamdan, and T. Rihaya, “Compression molding of short natural fiber composites: Factors and implications,” Int. J. Adv. Manuf. Technol., vol. 105, pp. 3437–3450, 2019. https://doi.org/10.1007/s00170-019-04466-8

[9] Y. W. Leong, S. Thitithanasarn, K. Yamada, and H. Hamada, “Techniques for molding natural fiber-reinforced composites,” in Natural Fibre Composites: Materials, Processes and Applications, pp. 216–232, 2014. https://doi.org/10.1533/9780857099228.2.216

[10] A. M. Kumar, K. Jayakumar, and M. Shalini, “Performance enhancement of PLA composites with agricultural residues: Sawdust, rice husk, and bagasse,” J. Polym. Mater., vol. 39, no. 3-4, pp. 269–281, 2022. https://doi.org/10.32381/JPM.2022.39.3-4.7

[11] T. Nampitch, “Physical and structural properties of PLA/natural rubber composites integrated with bagasse fibers,” Results Mater., vol. 12, 100225, 2021. https://doi.org/10.1016/j.rinma.2021.100225

[12] T. A. Makhetha, K. Mpitso, and A. S. Luyt, “Fabrication and analysis of EVA/PLA composites with bagasse fibers for filtration purposes,” J. Compos. Mater., vol. 51, no. 9. https://doi.org/10.1177/0021998316675399

Downloads

Published

2025-09-23

Issue

Vol. 7 No. 5 (2025): Proceedings of the International Conference on Innovations in Mechanical Robotics Computing and Biomedical Engineering: ICIMRBE 2025

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite

[1]
K. Prabhu N S, N. Kaippara, N. T A, S. K S, S. B. Ramachandran, and R. Raj, “Mechanical and Thermal Characterization of Composite from PLA and Sugarcane Bagasse”, AIJR Proc., vol. 7, no. 5, pp. 78–86, Sep. 2025, doi: 10.21467/proceedings.7.5.11.